- High speed microprocessor based bench top micro Centrifuge machine.
- Heavy duty C.R.C. construction finished with powder coating
- Stainless Steel centrifugal bowl for extra protection and easy cleaning.
- Fitted with well-balanced brushless motor with electronic drive and Digital timer 1-99 minutes.
- LCD Display for set time, run time, set and run rpm, rcf.
- Programmable Speed Regulator from 2000 to 20000 in interval of 100 rpm
- 10 programmers can be stored in memory and automatic rotor identification on display.
- Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over
- Dynamic brake (automatic) and imbalance detector are provided.
- Selection of 3 acceleration + 3 deceleration profile.
- Last test parameter recalls and displays automatically on LCD
- Works on 230±10V/50Hz power supply.
Price of machines are without Rotor Head which can be selected by end user as per their specific requirement from below mentioned table:
| Type of Rotor | Capacity | Speed (RPM) |
| Angle Head | 12×1.5/2ml | 20000 |
| Angle Head | 24×1.5ml | 16000 |
| Angle Head | 6x50ml | 13000 |
| Angle Head | 4x100ml | 13000 |
| Angle Head | 8x15ml | 13000 |
| Angle Head | 8x50ml | 12000 |
| Angle Head | 12x15ml | 12000 |
All the above stated heads are supplied with P.P. Centrifuge Tubes, Head Puller, and Spanner. The 2ml rotor comes with adopters to accept Eppendorf tubes of 0.2/0.5ml
Note: The speed of the machine depends upon the type of rotor being used.
